| Application |
| Design | for connection to external diagnostic electronics VSE |
| Application | vibration detection |
| Electrical data |
| Operating voltage [V] | 7.2…10.8 DC; (cULus: 9 V DC) |
| Current consumption [mA] | < 15 |
| Min. insulation resistance [MΩ] | 100; (500V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Outputs |
| Analogue current output [mA] | 0…10 |
| Max. load [Ω] | 300 |
| Measuring/setting range |
| Measuring range of vibration [g] | -25…25 |
| Frequency range [Hz] | 0…6000 |
| Measuring principle | capacitive |
| Sensitivity [µA/g] | 142 |
| Number of measurement axes | 1 |
| Accuracy / deviations |
| Linearity deviation | 0,2 % |
| Operating conditions |
| Ambient temperature [°C] | -30…125 |
| Note on ambient temperature | |
| Protection | IP 67; IP 68; IP 69K |
| Tests / approvals |
| EMC | | EN 61000-6-2 | | | EN 61000-6-3 | | | EN 50178 | | |
| Shock resistance | | DIN EN 60068-2-27 | 50 g 11 ms | |
| Vibration resistance | | DIN EN 60068-2-20 | 20 g / 10 … 2000 Hz | |
| MTTF [years] | 1701 |
| Mechanical data |
| Weight [g] | 50 |
| Type of mounting | M8 x 1,25 |
| Materials | housing: stainless steel (1.4404 / 316L) |
| Tightening torque [Nm] | 8 |
| Mechanische Überlastfestigkeit [g] | 500 |
| Sensor type | microelectromechanical system (MEMS) |
| Accessories |
| Accessories (optional) | | washers: 5, conical, E30115 | |
| Remarks |
| Pack quantity | 1 pcs. |
| Electrical connection |
| Connector: 1 x M12; Maximum cable length: 250 m |
中文
Malaysia
Reviews
There are no reviews yet.