| Application |
| Function principle |
absolute |
| Revolution type |
multiturn |
| Electrical data |
| Operating voltage [V] |
9…30 DC; (“supply class 2” to cULus) |
| Current consumption [mA] |
< 100; ((10 V DC) ; ≤ 50 (24 V DC)) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Outputs |
| Short-circuit protection |
yes |
| Code |
binary |
| Measuring/setting range |
| Resolution |
4096 steps; 4096 revolutions; 24 bit |
| Accuracy / deviations |
| Accuracy [°] |
0.08 |
| Software / programming |
| Parameter setting options |
CAN parameter; scaling; preset; Baud rate; direction of rotation; Node ID |
| Interfaces |
| Communication interface |
CAN |
| Factory settings |
| Baud rate: 125 k |
| Node ID: 32 |
|
| CAN |
| Protocol |
CANopen; DSP – 406 V3.1; DS 301 V4.02; DS 306 V2.0 |
| Factory settings |
| Baud rate: 125 k |
| Node ID: 32 |
|
| Operating conditions |
| Ambient temperature [°C] |
-40…85 |
| Protection |
IP 68; IP 69K |
| Tests / approvals |
| Shock resistance |
|
| Vibration resistance |
|
| MTTF [years] |
240 |
| Mechanical data |
| Weight [g] |
234 |
| Dimensions [mm] |
Ø 36.5 / L = 100 |
| Materials |
flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating |
| Max. revolution, mechanical [U/min] |
6000 |
| Max. starting torque [Nm] |
5 |
| Reference temperature torque [°C] |
20 |
| Shaft design |
solid shaft |
| Shaft diameter [mm] |
10 |
| Shaft material |
|
| Max. shaft load axial (at the shaft end) [N] |
180 |
| Max. shaft load radial (at the shaft end) [N] |
180 |
| Fixing flange |
synchro-flange |
| Displays / operating elements |
| Display |
| Preoperational mode |
LED, green |
| Operational mode |
LED, green flashing |
| error message |
LED, red flashing |
|
中文
Malaysia
Reviews
There are no reviews yet.